Table of Contents
Advertisement
Clerk sign-on/sign-off operation
■ Sign-on operation
Prior to item entry, the clerk will be compelled to enter his or her assigned clerk code. However, this
may not be necessary if the POS terminal has been programmed for the clerk code entry as re-
designation mode.
NOTE
Your POS terminal provides three systems for the sign-on/off operation; clerk code entry, contactless
clerk key and WMF clerk key systems.
Clerk code entry system:
Clerk direct key system:
Contactless clerk key system: Clerks can be assigned by setting corresponding contactless clerk keys.
WMF clerk key system:
1.
Enter your clerk code, and touch [CLK#] or insert or set your clerk key.
2.
Enter your password, if necessary.
3.
Enter the drawer number you use, if necessary.
Clerks can be assigned by entering his or her clerk code in advance.
Clerks can be assigned by touching his or her direct clerk key.
Any registration cannot be performed unless a contactless clerk key is
set.
Clerks can be assigned by inserting WMF clerk keys. (Continental
Europe only)
(Clerk code entry system)
In case of code entry
25
Advertisement
Table of Contents
