Care And Cleaning; Cleaning The Housing And Hopper; Cleaning The Burrs; Remove The Ring Burr - Baratza Maestro Plus Operation Manual

Care and Cleaning

Cleaning the Housing and Hoppers
Switch the grinder off and remove the plug from
the power supply. Remove any remaining beans
from the bean hopper (it may be easiest to tip
the grinder over and pour the beans into a bowl).
Remove the hopper by twisting it in a counter-
clockwise direction as far as it will turn, and then
lift the bean hopper from the housing. Wash
the hopper, hopper lid, and ground coffee bin in
warm soapy water, rinse and dry.
Caution
Do not put the bean hopper, hopper lid, or
ground coffee bin in the dishwasher. Hand wash
only. Do not immerse the grinder housing in
water.

Cleaning the Burrs

If the grinder is used daily, the burrs should be
cleaned every few weeks. Cleaning enables the
burrs to achieve the most consistent grind pos-
sible. Cleaning also removes coffee oils, which
can degrade the flavor of the ground coffee. Do
not wash the burr.

Remove the Ring Burr

Pull the silicone seal off the top of the ring Burr.
Remove the ring burr by lifting it straight up out
of the grinder by the lifting tabs. If the burr does
not lift out, ensure that the grind adjustment tab
is turned fully counterclockwise.
7