FO-4400U
FO-CS1
3. Installing the printer cartridges
(Toner cartridge: FO-50ND)
(Drum cartridge: FO-47DR)
Follow the steps below to install or replace the toner and drum car-
tridges.
•
The initial starter toner cartridge included with the fax machine can
print approximately 3000 letter-size pages (4% coverage of each
page; continuous printing).
•
The replacement toner cartridge (FO-50ND) can print approximately
6000 letter-size pages.
•
The drum cartridge (FO-47DR) can print approximately 20,000 let-
ter-size pages.
1
Press the cover release to open the print compartment cover.
•
Caution! The fusing unit inside the print compartment becomes
very hot during operation. Be careful not to touch the
inside of the compartment.
2
If you are replacing the toner cartridge, remove the old cartridge and
dispose of it according to local regulations.
Go directly to STEP 6 if you are only replacing the toner cartridge
and not the drum cartridge.
•
If you are replacing the drum cartridge but not the toner cartridge,
remove the toner cartridge and place it on a sheet of paper.
To make the cartridge more compact for disposal, press the buttons on
the ends of the handle and fold the handle down.
3
If you are replacing the drum cartridge, remove the old cartridge and
dispose of it according to local regulations.
4
Remove the new drum cartridge from its packaging. Insert the drum
cartridge into the print compartment.
•
Caution! Excessive exposure to light will damage the drum
cartridge. Install the cartridge promptly after removing it
from its packaging.
•
Make sure the drum cartridge is inserted in as far as it will go.
5
If you are installing a new toner cartridge, remove the new toner car-
tridge from its packaging. Remove the tape from the cartridge and
then open the cartridge handle so that it stands straight up.
6
Shake as indicated by the arrows to distribute the toner evenly within
the cartridge.
•
If the toner is still lumpy after shaking, the gears in the cartridge
may make a noticeable sound when the print compartment cover
is closed after installing the cartridge. This is normal and does not
indicate a problem.
1 – 5
BLUE
GREEN