Transmittable Documents - Sharp FO 4400 - B/W Laser - All-in-One Service Manual

FO-4400U
FO-CS1

[4] Transmittable documents

1. Document Sizes
width
Normal size
length
(Max.)
(Min.)
128 mm
148 mm 256 mm
[Normal size]
* With special sizes, only one sheet can be fed into the machine at a
time. Insert next page into feeder as current page is being scanned.
2. Paper Thickness & Weight
Indication
Weight Japanese indication 45kg paper
indication Size 4 6
Metric system
indication
American indication 14 LB
LB system indication
Thickness Metric system
indication indication
Inch system indication 0.0024"
Document Document size
size Range
Number of Document size
ADF sheets Weight
Paper Kind
quality
3. Document Types
• Normal paper
Documents handwritten in pencil (No. 2 lead or softer), fountain pen,
ball point pen, or felt-tipped pen can be transmitted.
Documents of normal contrast duplicated by a copying machine can
also be transmitted.
• Diazo copy (blueprint)
Diazo copy documents of a normal contrast may be transmitted.
• Carbon copy
A carbon copy may be transmitted if its contrast is normal.
5.8" – 10.1" (148 – 256 mm)
5.0" – 14.3" (128 – 364 mm)
(Max.)
483 mm
364 mm
279 mm
[Special size]
Product specifications
Lower Limit Upper Limit
70kg paper
52g/m 2 80g/m 2
20 LB
0.06mm 0.1mm
0.0035"
(148mm 128mm) ~
W letter (279mm 483mm)
A4 (210mm 297mm)
Letter (216mm 279mm)
B6 ~ Letter/A4 size 50 sheets
B4 size/Legal 20 sheets
W letter size 1 sheet
2
90 kg (104g/m ) or more
2
135 kg (157g/m ) or less 1 sheet
Paper of fine quality/bond paper/
Kent paper
4. Cautions on Transmitting Documents
• Documents written in yellow, greenish yellow, or light blue ink cannot
be transmitted.
• Ink, glue, and correcting fluid on documents must be dry before the
documents can be transmitted.
• All clips, staples and pins must be removed from documents before
transmission.
• Patched (taped) documents should be copied first on a copier and
then the copies used for transmission.
• All documents should be fanned before insertion into the feeder to
prevent possible double feeds.
5. Automatic Document Feeder Capacity
Number of pages that can be placed into the feeder at anytime is as
follows:
Normal size: max. 50 sheets (14 lbs - 20 lbs)
Special size: single sheet only (manual feed)
•
NOTES: If you need to send or copy more 50 pages, place the ad-
ditional pages and carefully in the feeder just before the
last page is scanned. Do not try to force them in, as this
may cause double-feeding or jamming.
•
If your document consists of several large or thick pages
which must be loaded one at a time, insert each page into
the feeder as the previous page is being scanned. Insert
gently to prevent doublefeeding.
6. Readable Width & Length
The readable width and length of a document are slightly smaller than
the actual document size.
Note that characters or graphics outside the effective document scan-
ning range will not be read.
•
Readable width
8.2" (208 mm) max.
•
Readable length
This is the length of the document sent minus 0.16" (4 mm) from the top
and bottom edges.
1 – 3
Readable width
0.16"(4mm)
Readable length
0.16"(4mm)