Sharp FO 4400 - B/W Laser - All-in-One Service Manual page 51

Super G3 mode
Error Code Transmission Errors
E-16 Same as E-0
E-17 Same as E-1
E-18 Same as E-2
E-19 -
E-20 Same as E-4
E-21 -
E-22 -
E-23 Same as E-7
E-24 Same as E-8
E-25 Same as E-11
E-26 Same as E-12
E-27 Same as E-13
E-28 -
E-29
E-30 Error occurred during handshaking for super G3 mode
E-31
<Reference> Details of E-29 ~ 31
E-29 Handshaking error in V.8 negotiation procedure
E-30 Handshaking error in V.34 line probing procedure
E-31 Handshaking error in V.34 HDX training procedure
2. Service call error massage
Message
REMOVE ORIGINAL (S)
NO PAPER (TRAY)
NO PAPER (UPPER)
NO PAPER (LOWER)
NO PAPER (BOTH CASS.)
NO PAPER (TRAY, UPPER)
NO PAPER (TRAY, LOWER)
NO PAPER
SIZE ERROR
LASER ERROR
POLYGON ERROR
FAN MOTOR ERROR
CHECK UPPER CASSETTE
CHECK LOWER CASSETTE
CHECK BOTH CASSETTES
TONER EMPTY
PCU COMM. ERROR
RX DOCUMENT TRAY OFF
HIGH VOLTAGE ERROR
HEATER LOW ERROR
HEATER HIGH ERROR
WARMING UP ERROR
CHECK COVER OR DRUM
DRUM LIFE OVER
PAPER JAM
Reception Errors
Same as E-0
Same as E-1
Same as E-2
Same as E-8
Same as E-9
Same as E-10
-
Same as E-7
-
Same as E-11
Same as E-12
Same as E-13
Same as E-14
Document is stuck at the auto-feeder.
No recording paper on the tray.
No recording paper in the upper cassette.
No recording paper in the lower cassette.
No recording paper in either cassette.
No recording paper in the tray nor in the upper cassette.
No recording paper in the tray nor in the lower cassette.
No recording paper anywhere.
The size of the recording paper is wrong.
The laser unit abnormal.
The polygon motor abnormal.
The fan motor abnormal.
The upper cassette is not set properly.
The lower cassette is not set properly.
Neither cassette is set properly.
There is no toner left.
No data communication between the PCU and the control PWB.
The document-receiving tray is not set properly.
Abnormality with the high-voltage portion.
Heater temperature is too low.
Heater temperature is too high.
Warming up is not done properly.
Printer cover may be open, or the drum cartridge may not be set properly.
Drum life is over.
Recording paper is stuck inside.
Description
2 – 37
FO-4400U
FO-CS1