Sharp FO 4400 - B/W Laser - All-in-One Service Manual page 76

FO-4400U
FO-CS1
17
Paper take-up roller
18
Print head unit (PH)
(a)
(c)
19
Paper empty sensor (PE1)
Fig. 17
(b)
Fig. 18
Fig. 19
1. Place the printer with its backside down.
2. Unhook the spring and remove the right-hand side of the Paper
Take-up Roller shaft from its bushing.
3. Remove the Paper Take-up Roller.
1. Unplug the connector from the Main Motor Unit and remove the
harness from the cord holder.
2. Unplug the connectors from the cord holder.
3. Remove the Print Head Unit (PH). (6 screws)
1. Remove the sensor fixing bracket and remove the Paper Empty
Sensor. (1 connector)
3 – 24