Table of Contents
Advertisement
When Using Formed Sheet Paper
Attaching the Paper Holder
Attach the separately sold Paper Holder (HA-B93PH) when printing on formed sheet
paper. The Paper Holder is composed of four parts and four screws.
In addition, a PC card cushion is enclosed to prevent the PC card from being dislodged
by an impact and so forth. Use this card as necessary.
Part B
Part D
1. Check that the power is off. If the power is on, always make sure to turn it off by
pressing the power key.
2. Press the ridged (
the splash protect cover while spreading
apart the left and right locks (
disengage as shown in the illustration, and
then open the splash protect cover (
3. Slide the lock knobs on the left and right
sides of the roll paper holder as shown
in the illustration to align at the FREE
position (
2
ridged (
• Please note that the positions of the
lock knobs on the left and right sides
are different.
4. Turn over the Handheld Printer Terminal.
) portions (
2
), and then push up the
) portion (
) to open.
2
Part C
Part A
PC card cushion
Screws (4)
) of
1
) to
).
3
2
1
FREE
1
3
1
2
2
LOCK
FREE
1
LOCK
E-39
Advertisement
Table of Contents
