Before Getting Started
Be sure to perform the following steps before trying to use the Handheld Printer
Terminal for the first time.
1. When unpacking, make sure that everything is included.
Open the box and make sure that all the items shown here are included.
Handheld Printer Terminal
Neck strap and stylus holder
Neck strap rings
Battery pack
PC card fixers
2. Charge the battery pack.
Use the AC Adaptor (AD-S10095AE/AU), Cradle-type Battery Charger or Bridge
Satellite Cradle to charge the battery pack. When charging the battery pack with these
options, first install the battery pack in the Handheld Printer Terminal. For
information about use of the options, see pages 54, 61 and 65.
E-16
Handheld Printer Terminal
n
PC Card Remover (2 pcs)
Stylus
Hand strap
Roll paper
58mm Paper Width Adjuster
User's Guide (this manual)