Table of Contents
Advertisement
Importing Client Snapshots
To import a client snapshot, please do the following:
NOTE
• Ensure that you have got the desired client snapshot (.zip format) which is taken and
exported from ViewSonic Device Manager on this or another computer.
1. On System tab, click Deployment > Snapshot.
2. The Snapshot list appears.
3. Click Import Snapshot on the top of the Snapshot list.
4. The Import Snapshot window appears.
5. Click Browse to locate the desired client snapshot, and then click Open to confirm.
NOTE
• ViewSonic Device Manager will automatically perform file check to ensure that the
file is a valid snapshot and there is no duplicate in the Snapshot list.
6. Click Import to start importing the desired snapshot.
7. On completion, the snapshot appears as an entry in the Snapshot list.
Deleting Client Snapshots
To delete a client snapshot, please do the following:
1. On System tab, click Deployment > Snapshot.
2. The Snapshot list appears.
3. Click to select the desired snapshot, and then click Delete Snapshot on the top of the list.
4. The Delete Snapshot window appears prompting for confirmation.
NOTE
• To delete more than one snapshot, Ctrl-click to select multiple files.
5. Click Delete to confirm.
6. The selected snapshot is removed from the Snapshot list.
Scanning Client Snapshots
The Scan Snapshot feature helps you to discover the local or remote client snapshots. There are two scenarios
that you need the help of this feature. The first scenario is that you choose to restore clients with remote snapshots
rather than local imported ones. In this scenario, the local list of available snapshots in ViewSonic Device Manager
may be not in sync with the remote list of snapshots on another computer where you choose to get snapshots.
The Scan Snapshot feature can synchronize your local list with the remote one.
Using ViewSonic Device Manager
Establishing a Basic Administration Environment
25
Advertisement
Table of Contents
