Quick Installation - Honeywell MT-SY-HWLM1916 - Arius 19" Widescreen LCD Monitor Owner's Manual

Quick Installation

Connecting The Monitor To The PC:
1. First, make sure the power is shut off to all units.
2. Connect one end of the video cable (VGA or DVI) to the corresponding port on the back of
the LCD monitor and the other end to the corresponding port on the back of your PC.
Fasten each end of the video cable with the built-in thumb screws to ensure a good
connection.
3. Connect one end of the AC Power Adaptor to the back of the monitor.
4. Plug the other end of the AC Power Adaptor into the wall outlet.
NOTE: It is recommended to plug your LCD monitor and computer into a surge
bar, or power strip, in order to protect your electronics from damage caused by
unstable power or power surges.
5. Turn on your computer and LCD monitor.
Layout Of Connections:
Anti-theft Lock
01. Power Connector
02. DVI Connector
03. VGA Connector
04. Audio Connector
05. USB 2.0
06. USB 2.0
07. USB 2.0
08. USB 2.0
09. USB 2.0
07. USB 2.0
06. USB 2.0
05. USB 2.0
04. Audio Connector
03. VGA Connector
02. DVI Connector
01. Power Connector
AC Power Input
DVI Digital Signal Input
VGA Analog Signal Input
Audio Input
Input
Output
Output
Output
Output
- 6 -
08. USB 2.0
09. USB 2.0
Upward / Downward Adjustment