Table of Contents
Advertisement
- Press the caller ID-volume (
calls (lower numbers).
NOTE: You may choose from the last three numbers that were dialed.
4. Press the TALK/SPEAKER button. The number dials automatically. If you
get a busy signal and want to keep dialing the number, press the redial/
format button to quickly redial the number.
Exit
Press the END button to exit a menu function and return to the standby
screen.
Page
The page feature helps you locate a misplaced handset . To send and receive
pages, all handsets must be registered. If your handset is not registered, follow
the instructions in the Registration section of this manual.
Paging from the Base/Group Page
Use the base-only to page all registered handsets at the same time.
1. Press the find button on the base. All handsets beep for two minutes, and
each handset's screen displays FIND HANDSET.
2. To cancel the page, press the find button on the base, or press the TALK/
SPEAKER button or the END button on each handset .
Mute
To have a private, off-line conversation, use the MUTE feature. The party on
the telephone line cannot hear you, but you can hear them.
1. Press the mute/menu OK button. The handset screen displays MUTE ON.
2. Press the mute/menu OK button to cancel and return to your phone
conversation.
Receiver Volume Control
When the handset is ON (in TALK mode) you may adjust the receiver volume
by pressing the caller ID-volume (
levels to choose from. When the maximum or minimum volume level is
reached, the phone beeps twice. VOL 1 is minimum and VOL 5 is maximum.
Do Not Disturb (D-N-D)
This feature allows you to turn off all the handset ringer(s) at once, by pressing
one button at the base unit, even though the ringer volume of handset(s) has
been preset.
1. In the standby mode, press the do not disturb button on the base.
2. The DND indicator illuminates and the handset screen displays
) to review the newest call and scroll to older
or
) button. There are five volume
.
Advertisement
Table of Contents
