Initial Setup; Handset Name; Date And Time - RCA 2112 User 's guide User Manual

Initial Setup

1.
Make sure your phone is OFF (not in TALK mode).
2. Press the mute/menu OK button to go to the main menu.
3. Press caller ID-volume ( or ) button to scroll to INITIAL SETUP.
4. Press the mute/menu OK button to confirm and you may program the
following items: Handset Name, Date and Time, Area Code, Tone/Pulse,
Language, Auto Talk, Registration, Deregistration.
NOTE: During programming, you may press the END / EXIT button at
any time to exit the sub-menu and return to the menu.

Handset Name

From the Initial Setup Menu:
1. Press the caller ID-volume ( or ) button to scroll to the HANDSET
NAME sub-menu.
2. Press mute/menu OK button to enter the menu. The screen displays
HANDSET NAME.
3. Use the touch-tone pad to enter a name (up to 14 characters). More than
one letter is stored in each of the number keys. For example, to enter Bill
Smith, press the 2 key twice for the letter B. Press the 4 key 3 times for the
letter I. Press the 5 key 3 times for the letter L. Press the 5 key 3 times for
the second letter L, and press the 1 key to insert a space between the first
and last name. Press the 7 key 4 times for the letter S; press the 6 key once
for the letter M; press the 4 key 3 times for the letter I; press the 8 key for
the letter T; press the 4 key twice for the letter H.
NOTE: If you make a mistake, use the delete/int/conf
button to backspace and delete one character at a time.
4. Press the mute/menu OK button to save your name. You will hear a
confirmation tone and the handset name shows in the display.

Date and Time

From the Initial Setup Menu:
1. Press the caller ID-volume ( or ) button to scroll to the DATE and TIME
sub-menu.
2. Press mute/menu OK button to enter the menu. Use the number keys to
enter the current date, (for example, 31 December, 2007) key in 071231.
3. Press mute/menu OK button to confirm your selection and advance SET
TIME sub-menu.
4. Use the number keys to enter the current hour and minute, then use the
caller ID-volume ( or ) to select AM or PM.