Alarm Clock - RCA 2112 User 's guide User Manual

3. Press caller ID-volume ( or ) button to scroll to ROOM MONITOR.
4. Press the mute/menu OK button to enter ROOM MONITOR menu. The
screen displays ROOM MONITOR EXTENSION?
5. Use the touch tone pad to enter the handset name/number to be
monitored.
NOTE: When this phone system is expanded (up to 4
handsets by purchase of optional Model 2110 handset
with recharge cradle), handsets are named HANDSET
1, HANDSET 2, HANDSET 3 and so on respectively.
6. The receiving handset will turn on the microphone and the originating
handset will turn on the speakerphone to monitor sound from the receiving
handset .
NOTE: For room monitoring mode to work, the
originating handset must NOT be on the cradle.
NOTE: While in room monitoring mode, the handsets will
emit an alert tone approximately every 5 seconds if there
is an incoming call. You may press the TALK/SPEAKER
button to quit room monitor and answer the call.
NOTE: While in room monitoring mode, the originating
handset can be switched to monitor by handset earpiece
by pressing the TALK/SPEAKER button once. Switch back to
speakerphone by pressing the TALK/SPEAKER button once.
NOTE: Press the END button on the handset to exit room monitor mode.

Alarm Clock

1. Make sure your phone is OFF (not in TALK mode)
2. Press the mute/menu OK button to go to the main menu.
3. Use the caller ID-volume ( or )) button to scroll to ALARM CLOCK.
4. Press mute/menu OK button to enter the menu. The screen displays ON >
OFF.
5. Use the caller ID-volume ( or ) button to select ON or OFF. Press
mute/menu OK button to confirm.
6. If ON is selected, then the screen displays SET ALARM TIME. Use the
number keys to enter the alarm time (for example, 02:10PM) key in 0210.
Use the caller ID-volume ( or ) button to select AM or PM.
7. Press mute/menu OK button to display >ONCE OR DAILY and select ONCE
or DAILY.
8. Press the mute/menu ok button to save selection. You will hear a
confirmation tone and return to main menu.