Wall Mounting The Phone - RCA 2112 User 's guide User Manual

2. Plug one end of the telephone line cord into the TEL LINE jack on the back
of the base and the other end into a modular jack.
3.
Plug the AC power conver ter into the electrical outlet and the DC
connector into the jack on the back of the base.
4. Place the handset in the base cradle. The charge/in use indicator turns on,
verifying the battery is charging.
5. Allow the phone to charge for 16 hours prior to first use. If you don't
properly charge the phone, battery performance is compromised.
CAUTION: To reduce risk of personal injury, fire , or damage
use only the power adaptor (Manufacturer: ESL, Type: IA5060,
120Vac/6Vdc/500mA ; Manufacturer : Nan Tong DaMing,
Type: DM-SC060058, 120Vac/60Vdc/0-0.58A) listed in the
user's guide. This power adaptor is intended to be correctly
orientated in a vertical or floor mount position.

Wall mounting the phone

To detach the desktop pedestal:
1. Plug one end of the straight
telephone line cord into the
jack on the bottom of the
base.
2. Feed the line cord through
the groove and plug the end
into the modular telephone
jack. Excess telephone line
c a n b e s t u f f e d i n t o t h e
recess area on the bottom of
the Base Unit .
3. Connect the small end of the power adaptor into the POVER 9V DC jack on
the back of the phone plug the other and into an AC power outlet .