NETGEAR WNR3500v2 - RangeMax Wireless N Gigabit Router Setup Manual page 6

To prepare your router for installation:
Carefully peel off the protective film covering both sides of your router (see
1.
Figure 1
Set up your wireless router by inserting the tabs of the stand (supplied with your router) into
2.
the slots on the bottom of your router as shown in
covering the status light panel of the router.
Figure 2
Place your router in a suitable area for installation (near an AC power outlet and accessible to
3.
the Ethernet cables for your wired computers).
2
Figure 2. Then, remove the protective film
Getting to Know Your Wireless Router
Figure 1).