Dhcp Configuration Options; Default Router - Efficient Networks SpeedStream 5100 Series User Manual

as the Default Router IP address, Primary or Secondary DNS IP addresses, and Primary or Secondary
Relay IP addresses.
• Commonly used non-Internet routed IP address ranges include:
10.0.0.0 - 10.255.255.255
172.16.0.0 - 172.31.255.255
192.168.0.0 - 192.168.255.255

DHCP Configuration Options

•
DHCP Server:
When Enabled, the router will operate as a DHCP server to handle DHCP requests received from
connected LAN-side hosts (DHCP clients). The DHCP server does not serve WAN-side DHCP
clients.
• Start IP Range:
Specifies the beginning IP address of the range of addresses from which the DHCP server will lease
to requesting DHCP clients. This value must be entered as an IPv4 address expressed in dotted-
decimal notation (e.g., 192.168.254.1).
• End IP Range:
Specifies the beginning IP address of the range of addresses from which the DHCP server will lease
to requesting DHCP clients. This value must be entered as an IPv4 address expressed in dotted-
decimal notation (e.g., 192.168.254.1).
• IP Netmask:
Specifies the IP subnet mask that corresponds to the range of IP addresses defined above. This value
must be entered as an IPv4 subnet mask in dotted-decimal notation (e.g., 255.255.255.0).
•

Default Router:

Specifies the IP address of a default gateway, or router, to be provided to DHCP clients. This value
must be entered as an IPv4 address expressed in dotted-decimal notation (e.g., 192.168.254.254).
•
Self:
Specifies that the SpeedStream router is to be used as the default gateway.
• DNS IP Address:
Specifies the IP address of the primary Domain Name System (DNS) server to be provided to DHCP
clients. A DNS server may be used by clients to resolve domain names to IP addresses. This value
must be entered as an IPv4 address expressed in dotted-decimal notation (e.g., 192.168.254.254).
• Use WAN:
Specifies that the DNS server address received from the WAN-side DHCP server is to be provided to
DHCP clients on the LAN.
• Domain Name
:
Specifies the DNS domain name for the DHCP server resident on your SpeedStream device. This
value must be entered as an alphanumeric string. This parameter is optional.
•
Lease Time:
IP addresses are leased from the DHCP server and are valid for a specified period, the lease time. At
SpeedStream Router User Guide
56