Efficient Networks SpeedStream 5100 Series User Manual page 123

Step On this window:
10
User Information
11
PPP Options
12
PPP Static IP
13
Interface Options
14 Connection Name
15 VC Wizard
5e. If you selected the PPPoA protocol:
Step On this window:
5e
User Information
6
PPP Options
7 PPP Static IP
8 Interface Options
9 Connection Name
10 VC Wizard
Do this:
session, steps 7-11 will repeat.
Enter user name and password (both are optional).
Select PPP options for this connection: dial-up mode, auto-connect on
disconnect, idle timeout.
Enter static IP address (optional).
Select interface options: firewall, attack detection system, universal plug
and play; RIP; NAT/NAPT.
Enter name to use for this connection. If multiple sessions were selected,
repeat steps 7-11 until last session is configured; then go to step 6.
Finish
.
Do this:
Enter user name and password (both are optional).
Select PPP options for this connection: dial-up mode, auto-connect on
disconnect, idle timeout.
Enter static IP address (optional).
Select interface options: firewall, attack detection system, universal plug
and play; RIP; NAT/NAPT.
Enter name to use for this connection.
Finish.
113
SpeedStream Router User Guide