Connect Your Computer - NETGEAR WNXR2000 Installation Manual

N300 Wireless Router
Step 5:

Connect your computer.

Connect with a wired connection
(as shown in this diagram) or
connect wirelessly to the router
with these settings:
Wireless Network (SSID): ______________
Wireless Password: ___________________
Note:
remove and re-insert the battery before connecting
Wireless on/off
your modem to power.
(not included)
Power on/off
Step 3:
Power on your modem.
Wait until your modem
cycles on (approximately
2 minutes).
If you have a modem with a battery-backup,
Laptop or Desktop
Computer
Wireless N 300+ Powerline AV Router
WNXR2000
Resource CD
Step 6:
Insert Your CD.
Click Router Setup and follow
the steps to set up a secure
wireless network.
Note: If your laptop does not have a
"No CD Drive" Installation
CD drive, see
on the back to complete your router setup.
Step 7:
Connect your Powerline
devices.
See next page.
7