NETGEAR WNXR2000 Installation Manual page 5

4.
Power on the router using the Power On/Off button on the
back of the router.
5.
Check that the power lights on both the XAVP1000 adapter
and on the router are lit. For more information on the status
lights, see "WNXR2000 Router Status Lights" on page 15
and "XAVP1000 Adapter LEDs and Buttons" on page 17.
6.
When the router indicates that the Ethernet port connected to
the Y-cable adapter is linked and active (the LED for the
Ethernet port
green), check that the Ethernet and Powerline
on the adapter are also on and blinking.
Connect the WNXR2000
Powerline AV Router
Follow the connection instructions as shown in the drawing on
the next page.
on the front of the router will be solid
5
LEDs