Scanning To A Network Computer; Scanning To A Flash Drive Or Memory Card - Dell V525W Manual

Scanning
3
Press the up or down arrow button to scroll to the scan option you want to set, and then press the left or right
arrow button to scroll to the setting you want.
Set the color, quality, original image size, and other scan options. If necessary, press
selection.
4
Press .

Scanning to a network computer

1
Load the original document faceup into the ADF or facedown on the scanner glass.
2
From the printer control panel, navigate to:
> Scan > > Computer
3
Press the left or right arrow button to manually select the name of the destination computer, and then press
Notes:
•
You may be prompted to enter a PIN if the computer requires it.
• To assign a computer name and a PIN to the computer, see the Help for the printer software associated with
your operating system.
4
Press the up or down arrow button to scroll to the scan option you want to set, and then press the left or right
arrow button to scroll to the setting you want.
Set the color, quality, original image size, and other scan options. If necessary, press
selection.
5
Press .
Note: For Macintosh users, you may need to enable scanning to your computer through Image Capture to scan
documents using a network printer and save the scan output.

Scanning to a flash drive or memory card

Notes:
•
Some features are available only in select printer models.
•
Make sure your flash drive or memory card is not write‑protected.
1
Load the original document faceup into the ADF or facedown on the scanner glass.
2
From the printer control panel navigate to:
> Scan > > Memory Device
3
Insert the flash drive or memory card, and then press
Note: The printer reads only one memory device at a time.
.
56
each time you make a
each time you make a
.