Table of Contents
Advertisement
9.
When your document has finished processing, it will open in the program you chose.
Scanning to Your Computer Over a Network
1.
Make sure your computer is attached to the network.
NOTE:
Dell printers can only be attached to a network using a Dell Network Adapter (sold separately).
2.
Make sure your computer and printer are on.
3.
Load your original document. For help, see
Original Document on the Scanner
4.
From the main menu, use the up and down Arrow buttons
.
The printer automatically detects if it is connected to a network. If it is connected to a network, the
Host Selection screen appears. If it is not connected to a network, the Scan Mode menu appears.
5.
From the Host Selection Screen, choose the computer to which you want to send the document, and
press Select
.
6.
Enter the four-digit PIN number specified for the host computer.
NOTE:
This can be found in the upper right corner of the All-In-One Main Page. For help, see
the Dell All-In-One
set.
7.
Press Select
.
The Scan Mode menu appears. For more information, see
Scanning Multiple Pages or Images
NOTE:
Some programs do not support multiple-page scanning.
You can scan multiple images at once to save time:
1.
Place the first sheet on the scanner glass. For more information, see
on the Scanner
Glass.
2.
Click Start
Programs or All Programs
All-In-One Center.
Glass.
Center. The PIN is not required by default; it is only requested if the PIN has been
Load an Original Document Into the ADF
to scroll to Scan, and press Select
Scan Options
Dell Printers
Dell Photo AIO Printer 964
or
Placing Your
Menu.
Placing Your Original Document
Using
Dell
Advertisement
Table of Contents
