Customizing Your Network Settings; Using The Lan Setup Options - NETGEAR WNDR3400 - N600 Wireless Dual Band Router User Manual

This chapter describes advanced features of the N600 Wireless Dual Band Router WNDR3400.
This chapter includes the following sections:
• "Using the LAN Setup
• "Using a Dynamic DNS Service" on page 5-5
• "Configuring the WAN Setup Options" on page 5-7
• "Configuring Static Routes" on page 5-9
• "Allowing Inbound Connections to Your Network" on page 5-11
• "Configuring Port Forwarding to Local Servers" on page 5-16
• "Configuring Port Triggering" on page 5-18
• "Wireless Repeating (Also Called WDS)" on page 5-22

Using the LAN Setup Options

The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host
Configuration Protocol (DHCP) and Routing Information Protocol (RIP).
The router is shipped preconfigured to use private IP addresses on the LAN side and to act as a
DHCP server. The router's default LAN IP configuration is:
• LAN IP address: 192.168.1.1
• Subnet mask: 255.255.255.0
These addresses are part of the designated private address range for use in private networks and
should be suitable for most applications. If your network has a requirement to use a different IP
addressing scheme, you can make those changes in the LAN Setup screen.
Customizing Your Network Settings
N600 Wireless Dual Band Router WNDR3400 User Manual

Customizing Your Network Settings

Options"
v1.0, August 2010
Chapter 5
5-1