NETGEAR WNDR3400 - N600 Wireless Dual Band Router User Manual page 21

Table 1-1. Basic Settings screen fields
Settings
Does Your ISP Require a Login?
These fields Account Name
appear only if no (If required)
login is required.
Domain Name
(If required)
These fields Internet Service Provider • PPTP (Point to Point Tunneling Protocol). This is used
appear only if
your ISP
requires a login.
Login
Password
Service Name
Connection Mode
Idle Timeout (In minutes) If you want to change the Internet login time-out, enter a new
Internet IP Address
Configuring Your Internet Connection
N600 Wireless Dual Band Router WNDR3400 User Manual
Description
• Yes
• No
Enter the account name provided by your ISP. This might also
be called the host name.
Enter the domain name provided by your ISP.
primarily in Austrian DSL services.
• Other. This is the default setting. It is for PPPoE (Point to
Point Protocol over Ethernet), the protocol used by most
DSL services worldwide.
The login name provided by your ISP. This is often an e-mail
address.
The password provided by your ISP.
If your ISP provided a Service Name, enter it here.
Specify when the router will connect to and disconnect from
the Internet.
• Always On. The router logs in to the Internet immediately
after booting and never disconnects.
• Dial on Demand. The router logs in only when outgoing
traffic is present and logs out after the idle time-out.
• Manually Connect. The router logs in or logs out only when
you click Connect or Disconnect in the Router Status
screen.
value in minutes. This determines how long the wireless router
keeps the Internet connection active after there is no Internet
activity from the LAN. Entering an Idle Timeout value of 0
(zero) means never log out.
• Get Dynamically from ISP. Your ISP uses DHCP to assign
your IP address. Your ISP automatically assigns these
addresses.
• Use Static IP Address. Enter the IP address that your ISP
assigned. Also enter the IP subnet mask and the gateway IP
address. The gateway is the ISP's wireless router to which
your wireless router will connect.
v1.0, August 2010
1-8