Scheduling Wireless Signal Down Time - NETGEAR WNDR3400 - N600 Wireless Dual Band Router User Manual

• To allow access from a single IP address on the Internet, select Only This Computer.
Enter the IP address that will be allowed access.
3. Specify the port number for accessing the management interface.
Normal Web browser access uses the standard HTTP service port 80. For greater security,
enter a custom port number for the remote management Web interface. Choose a number
between 1024 and 65535, but do not use the number of any common service port. The default
is 8080, which is a common alternate for HTTP.
4. Click Apply to have your changes take effect.
Note: When accessing your router from the Internet, type your router's WAN IP address
into your browser's address or location field, followed by a colon (:) and the
custom port number. For example, if your external address is 134.177.0.123 and
you use port number 8080, then enter http://134.177.0.123:8080 in your browser.

Scheduling Wireless Signal Down Time

For each wireless radio, you can schedule times when you want the wireless signal to be off.
During a scheduled "off" period, the specific wireless LED and the Dome LED (if applicable) will
be turned off as well. From the main menu, under Advanced, select Wireless Settings.
Figure 4-10
Using Network Monitoring Tools
N600 Wireless Dual Band Router WNDR3400 User Manual
v1.0, August 2010
4-14