NETGEAR JWNR2000v1 User Manual page 110

NETGEAR Wireless-N 300 Router JWNR2000 User Manual
Table 6-1. Wireless Router Status Fields (continued)
Field
Wireless Port. The following settings apply to the wireless port of the router.
Name (SSID)
Region
Channel
Mode
Wireless AP
Broadcast Name
Wi-Fi Protected Setup
6-4
Description
The wireless network name (SSID) being used by the wireless port of
the router. The default is NETGEAR.
The geographic region where the router is being used. It might be
illegal to use the wireless features of the router in some parts of the
world.
Identifies the channel of the wireless port being used. Click the link to
the online document "Wireless Networking Basics" in Appendix B
the frequencies used on each channel.
Indicates the wireless communication mode:
• Up to 54 Mbps.
• Up to 145 Mbps.
• Up to 300 Mbps (in this mode, there are two channels: a primary
channel [P] and a secondary channel [S]).
Indicates whether the radio feature of the router is enabled. If not
enabled, the Wireless LED on the front panel is off.
Indicates whether the router is broadcasting its SSID.
Indicates whether the router's PIN is enabled and whether the router
is configured for Push 'N' Connect (Wi-Fi Protected Setup). For more
information, see "Using WPS Push Button Connect (Wi-Fi Protected
Setup)" on page 2-13.
v1.0, February 2010
Using Network Monitoring Tools
for