Code 128 Code Page; Telepen - Honeywell 4820HDHM User Manual

Code 128 Message Length
Scan the barcodes below to change the message length. Refer to Message
Length Description (page 7-2) for additional information. Minimum and
Maximum lengths = 0-80. Minimum Default = 0, Maximum Default = 80.
Minimum Message Length
Maximum Message Length

Code 128 Code Page

Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the bar-
code being scanned was created using a code page that is different from the
one the host program is expecting. If this is the case, scan the barcode below,
select the code page with which the barcodes were created (see Code Page
Mapping of Printed Barcodes on page A-7), and scan the value and the Save
barcode from the Programming Chart on the inside the back cover of this man-
ual. The data characters should then appear properly.
Code 128 Code Page

Telepen

<Default All Telepen Settings>
7 - 17