Operational Info Main Menu; Restore All Defaults Main Menu - Casio XJ-H2600 User Manual

Operational Info Main Menu

Setting Name Input
Input Signal R C V H D U N Source
Signal Name R C V H D U
Resolution R H
Horizontal R C V H D
Frequency
Vertical R C V H D
Frequency
Scan System R C H D
Light Time R C V H D U N Single

Restore All Defaults Main Menu

Setting Name Input
Unit Operating R C V H D U N Single
Time
Restore All R C V H D U N Single
Defaults
Setting Unit
This sub-menu item shows the currently selected input signal (RGB,
Specific Component, Video, S-video, HDMI (PC), or HDMI (DTV)). "- - - -" is
indicated here when there is no input signal.
Source This sub-menu item shows the signal name of the signal being input
Specific to the projector. For details about signal names, see "Signal Name"
under "Supported Signals" (page 62).
Source This sub-menu item appears only when RGB is the input signal. It
Specific shows the number of vertical and horizontal pixels of resolution of
the RGB or HDMI (PC) input signal.
Source This sub-menu item shows the horizontal frequency of the input
Specific signal.
Source This sub-menu item shows the vertical frequency of the input signal.
Specific
Source This sub-menu item appears only when RGB, Component,
Specific HDMI (PC), or HDMI (DTV) is the input signal, and shows the scan
system of the input signal. The scan system is interlace or
non-interlace for an RGB or HDMI (PC) signal input, and interlace or
progressive for a component or HDMI (DTV) signal input.
This sub-menu item shows the cumulative number of hours the
current light source unit has been used to date.
Setting Unit
This sub-menu item shows the cumulative operating time of this unit.
This time cannot be initialized.
This sub-menu returns all sub-menu items on all main menus to their
initial default settings. This operation can be performed regardless of
the currently selected input source and regardless of whether or not
a signal is currently being input. For details about this procedure, see
"To restore all settings on the setup menu to their initial factory
defaults" on page 37.
49
Description
Description