Connecting To An Image Output Device; Connecting The Analog Rgb Output Of A Computer To The Projector - Casio XJ-H2600 User Manual

Connecting to an Image Output Device

Connecting the Analog RGB Output of a Computer to
the Projector
Connect the projector's COMPUTER IN 1 or COMPUTER IN 2 terminal to the RGB terminal of a
computer as shown in the illustration below.
Important!
Always turn off the projector and the computer before connecting them.
Take care so the volume level of the computer is not set too high.
Projector
COMPUTER IN 1 terminal
AUDIO IN 1 terminal
COMPUTER IN 2 terminal
AUDIO IN 2 terminal
Audio cable (commercially available)
Bundled mini D-Sub cable
(analog RGB output terminal)
12
Computer
To monitor terminal
To line output terminal