Casio XJ-UT311WN Network Function Manual
  1. Manuals
  2. Brands
  3. Casio Manuals
  4. Projector
  5. XJ-UT311WN SERIES
  6. Network function manual

Casio XJ-UT311WN Network Function Manual

Hide thumbs Also See for XJ-UT311WN:
Table of Contents

Advertisement

Quick Links

Download this manual
DATA PROJECTOR
Network Function Guide
 Be sure to read the "Safety Precautions" and "Operating Precautions" in the "User's Guide"
document, and make sure you use this product correctly.
 Keep this manual in a safe place for future reference.
 Visit the site below for the latest version of this manual.
http://world.casio.com/manual/projector/
Scope of this Manual's Content
The procedures in this manual are presented based on a Windows computer running Network
Connection.
If you are using a different type of device, see the software user documentation that can be obtained
from the download page of each type of software.
 The contents of this User's Guide are subject to change without notice.
 Copying of this manual, either in part or its entirety is forbidden. You are allowed to use this
manual for your own personal use. Any other use is forbidden without the permission of CASIO
COMPUTER CO., LTD.
 CASIO COMPUTER CO., LTD. shall not be held liable for any lost profits or claims from third
parties arising out of the use of this product or this manual.
 CASIO COMPUTER CO., LTD. shall not be held liable for any loss or lost profits due to loss of
data due to malfunction or maintenance of this product, or any other reason.
 The sample screens shown in this manual are for illustrative purposes only, and may not be
exactly the same as the screens actually produced by the product.
1
EN

Advertisement

Table of Contents
loading

Related Manuals for Casio XJ-UT311WN

Summary of Contents for Casio XJ-UT311WN

  • Page 1  CASIO COMPUTER CO., LTD. shall not be held liable for any loss or lost profits due to loss of data due to malfunction or maintenance of this product, or any other reason.

  • Page 2: Software Required To Use Network Functions

    Visit the website at the URL below to download the software. http://world.casio.com/download/projector/ Important!  Before installing the above software on a computer, be sure to visit the CASIO website for information about minimum system requirements, downloading, usage conditions, and other precautions you need to observe.

  • Page 3: Table Of Contents

    Contents Software Required to Use Network Functions........2 Projecting Computer Screen Contents Over a LAN Connection ..............5 Workflow from LAN Connection to Projection ........5 Connecting the Wireless Adapter to the Projector.........6 Establishing a Wireless LAN Connection between the Projector and a Computer ..........6 Projector SSID ......................
  • Page 4 Displaying the Viewer Control Page .............29 To display the Viewer Control page over a wired LAN connection......29 To return to the “CASIO Projector” top page from the Viewer Control page ..... 29 Viewer Control Page Operations ............30 Appendix ................ 31 Projecting Via a Wireless LAN Connection with Various Different Devices....................31...

  • Page 5: Projecting Computer Screen Contents Over A Lan Connection

    Projecting Computer Screen Contents Over a LAN Connection This section covers everything you need to know for establishing a LAN connection between the projector and a computer, and projecting the computer’s display contents. Workflow from LAN Connection to Projection There are a number of different ways to establish a LAN connection between the projector and a computer.

  • Page 6: Connecting The Wireless Adapter To The Projector

    Connecting the Wireless Adapter to the Projector Connect the CASIO wireless adapter specified for your projector model to its USB-A port. See your projector’s User’s Guide for detailed information about where ports are located. If “On” is selected for “Plug and Play”...

  • Page 7: Establishing A Direct Wireless Lan Connection Between The Projector And A Computer

    Establishing a Direct Wireless LAN Connection between the Projector and a Computer This section explains how to use Network Connection to search for a projector SSID and establish a wireless LAN connection between the projector and computer. The operations described here establish a wireless LAN connection between the projector and computer and start projection of the computer screen.
  • Page 8 Computer Operation Start up Network Connection.  If the “Set Network Location” dialog box appears, click [Cancel] to close the dialog box.  The Network Connection window will appear with the message “Connecting”.  If the projector could not be found, a [Reconnect] button will appear on the Network Connection window.
  • Page 9  While the projector is connected to a computer over a wireless LAN, a Network Connection window like the one shown below will be displayed on the computer screen. The computer screen image (main screen) will be projected.  For details about Network Connection window operations, see the separate “Network Connection Guide”.

  • Page 10: Connecting The Projector To An Outside Network Without Terminating A Direct Wireless Lan Connection With A Computer

    [Admin Screen] on the menu that appears.  This starts up the computer’s web browser and displays the “CASIO Projector” top page. On the left pane, click “Projector Admin”. On the password input screen that appears, enter the password.
  • Page 11 On the left pane, click “Network Settings”.  This displays the “Network Settings” page.  Input and settings required here are those surrounded by the red boundaries. You do not need to change other settings.  For details about this page, see “Configure Network Settings page settings” (page 22). Click the “Obtain an IP address automatically”...

  • Page 12: To Establish A Wired Lan Connection Between The Projector And A Router While Maintaining A Direct Wireless Connection Between The Projector And A Computer

    Use the remote controller that comes with the projector to check if the projector is connected to the wireless LAN access point. 1. Press the [MENU] key, and then select “Network Settings” “Wireless LAN Info”. 2. On the “Wireless LAN Info” dialog box that appears, check “External AP Connection Status”. ...

  • Page 13: Establishing A Connection Between The Projector And Computer Via A Wireless Lan Access Point

    Establishing a Connection between the Projector and Computer via a Wireless LAN Access Point A LAN connection can be established between the projector and computer by connecting both of them to an existing wireless LAN access point inside of a company, etc. Wireless LAN access point Wireless LAN Wireless LAN...

  • Page 14: Establishing A Connection Between The Projector And Computer And Projecting Via A Wireless Lan Access Point

    Establishing a Connection between the Projector and Computer and Projecting via a Wireless LAN Access Point The procedure below assumes the conditions described below.  The computer is already connected to the wireless LAN access point. It makes no difference whether the computer is connected by wireless LAN (Wi-Fi) or wired LAN (using a LAN cable).

  • Page 15: Connecting The Projector To A Computer Via A Wired Lan

    Connecting the Projector to a Computer via a Wired The method you should use to connect the projector to a computer over a wired LAN depends on whether or not the computer will also be connected to an outside network at the same time. Wired LAN connection when it is not necessary to connect the computer to an outside network Use a LAN cable to connect the projector and computer.

  • Page 16: Using A Lan Cable To Connect A Computer Directly To The Projector

    Using a LAN Cable to Connect a Computer Directly to the Projector Connect the computer to the projector with the LAN cable (use of a shielded LAN cable (STP) is recommended). Projector Operation Press the [INPUT] key. This will display the “Input” dialog box. Use the [] and [] keys to select “Network”...

  • Page 17: Establishing A Wired Lan Connection Between The Projector And A Computer Via A Router

    Establishing a Wired LAN Connection between the Projector and a Computer via a Router The procedure below assumes that a DHCP server is running on the network to which the router belongs, and that there is a LAN connection between the computer and router. Projector Operation Use a LAN cable (use of a shielded LAN cable (STP) is recommended) to connect the projector to the router to which the computer is connected via the LAN.

  • Page 18: Projector Network Settings

    Projector Network Settings There are two types of projector network settings: basic settings that can be configured by the projector alone, and more detailed settings that can be configured by using a computer connected to the projector via a LAN connection to access the “Projector Admin” pages. Using the Projector Setup Menu You can use the “Network Settings”...
  • Page 19 To do this: Perform this operation: Change the SSID Important!  If a user SSID has already been created, you will not be able to change the SSID using the projector menu. 1. Press the [MENU] key and then select the following: “Network Settings” “Projector Wireless LAN Settings”...

  • Page 20: Using The Projector Admin Pages

    [Admin Screen] on the menu that appears.  This starts up the computer’s web browser and displays the “CASIO Projector” top page. On the left pane, click “Projector Admin”. On the password input screen that appears, enter the password. (The initial default password is “admin”.) Click the [Login] button.
  • Page 21 Start up the computer’s web browser, input “http://<IP address you looked up in step 3 above>” into the address bar, and then press [Enter].  This will display the “CASIO Projector” top page. On the left pane, click “Projector Admin”. On the password input screen that appears, input the password.

  • Page 22: Projector Admin Pages Operations

    Projector Admin Pages Operations Perform the operations below after logging in to the Projector Admin Pages. For information about the operation up to login, see “Logging In to the Projector Admin Pages” (page 20). To do this: Perform this operation: Display the system On the left pane, click “System Status”.
  • Page 23 3. To apply the settings you input on the projector, click [Apply]. Log out from the In the upper right corner of the web browser window, click “Logout”.  This returns to the “CASIO Projector” top page. Projector Admin pages...

  • Page 24: Control Panel Page Network Items

    Control Panel Page Network Items To do this: Perform this operation: Change the projector name In the “Projector name” box, input up to 16 single-byte characters (no symbols) for the projector name. Specify whether or not to require log in code input In the “Login Code”...

  • Page 25: Network Settings Page Items

    Network Settings Page Items To do this: Perform this operation: Specify auto acquisition of an IP In the “IP Settings” area, click “Obtain an IP address automatically”. address from the external LAN device Specify the IP address manually 1. In the “IP Settings” area, click “Use the IP address below”. 2.

  • Page 26: Remotely Controlling The Projector Over A Lan Connection

    Remotely controlling the Projector Over a LAN Connection You can use the procedure below to control the projector from a computer or other external device over a LAN connection. To remotely control the projector from a computer connected via a LAN Referring to “Logging In to the Projector Admin Pages”...
  • Page 27 After you are finished with remote control operations, click “Logout” to log out from the Projector Admin pages. Note  The projector supports the external devices and commands below. External Devices and Commands Refer to: All PJLink Class1 (Version 1.00) commands http://pjlink.jbmia.or.jp/english/ ®...
  • Page 28 Control Panel Page Remote Control Items Depending on its model, some of the items and their functions may not be supported by and may not be available on your projector. Group Item Description Refresh (Button) Click to refresh the screen with the latest information. Projector Status Projector Status Shows the projector’s current status as either “ON”...

  • Page 29: Projector File Viewer Operations

    To return to the “CASIO Projector” top page from the Viewer Control page In the upper left corner of the web browser window, click “CASIO Projector”.

  • Page 30: Viewer Control Page Operations

    For details about File Viewer operations, see the separate User’s Guide. Exit the Viewer Control page and return to Click [EXIT]* the “CASIO Projector” top page *1 File Viewer will not be exited if you click [EXIT] while it is projecting.

  • Page 31: Appendix

    *1 Note that functions may be limited by the version of Mac OS being used. For the latest information about operating environments, visit the CASIO website. *2 You can download Network Connection for Mac OS from the CASIO projector support site located at the URL shown below. The CASIO projector support site also includes information about required computer environments and operation details.

  • Page 32: Troubleshooting

    Troubleshooting Wireless LAN Connection between the Projector and a Computer Problem Cause and Required Action  If any other wireless LAN utility besides Network Connection is running on the I can’t establish a wireless LAN connection between computer, close it. ...
  • Page 33 MA1703-A...

This manual is also suitable for:

Xj-ut351wn

Table of Contents