Option Settings 2 Main Menu - Casio XJ-H2600 User Manual

Option Settings 2 Main Menu

Setting Name Input
Pointer R C V H D U N Single
Plug and Play R C V H D U N Single
(USB port
models only)
Audio Out R C V H D U N Single
High Altitude R C V H D U N Single
Control Panel R C V H D U N Single
Lock
Custom Logo R C V H D U
Capture
Setting Unit
Use this sub-menu to specify the type of pointer that appears first
when you press the [POINTER] key.
Use this sub-menu to turn plug-and-play on or off.
On*:
Select this option to turn on plug-and-play. This will allow the
projector detect when an external USB device is connected and
make that device the input source automatically.
Off:
Select this option to turn off plug-and-play.
Note
For details about plug-and-play, see the "USB Function
Guide".
Regardless of the setting of this item, plug-and-play is
disabled while the projector is in the 3D input mode ("3D
Input Mode", page 17) or "On" is selected for the "Option
Settings 2
Specifies whether the input audio signal should be output from the
projector's built-in speaker or to the line output.
Speaker*:
Outputs the audio signal being input to the projector from the
speaker.
Line:
Outputs the audio signal being input to the projector from the
AUDIO OUT terminal.
Use this sub-menu to turn the high-altitude fan speed setting on or
off in accordance with the altitude of the area where you are using
the projector.
On:
Select this setting when using the projector in a high altitude
(1,500 to 3,000 meters above sea level) area where air is thin. This
setting increases cooling efficiency.
Off*:
Select this setting at normal altitudes (up to 1,500 meters).
Important!
Do not use this projector at altitudes greater than
3,000 meters above sea level.
Use this sub-menu to disable (lock) and enable (unlock) the
projector's control panel.
On:
Select this setting to disable (lock) all projector key operations
except for [P] (Power).
Off*:
Select this setting to enable (unlock) projector key operations.
Single See "Custom Logo Capture" (page 30).
46
Description
Interactive Pointer" setting.