Lan Setup - NETGEAR DGND3800B User Manual

N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B
Type the host name that your Dynamic DNS service provider gave you. The Dynamic DNS
5.
service provider might call this the domain name. If your URL is myName.dyndns.org, then
your host name is myName.
Type the user name for your Dynamic DNS account.
6.
Type the password (or key) for your Dynamic DNS account.
7.
If your Dynamic DNS provider allows the use of wildcards in resolving your URL, you can
8.
select the Use Wildcards check box to activate this feature. For example, the wildcard
feature causes *.yourhost.dyndns.org to be aliased to the same IP address as
yourhost.dyndns.org.
Click Apply to save your settings.
9.
If your ISP assigns a private WAN IP address such as 192.168.x.x
Note:
or 10.x.x.x, the Dynamic DNS service does not work because private
addresses are not routed on the Internet.

LAN Setup

The LAN Setup screen allows configuration of LAN IP services such as DHCP and Routing
Information Protocol (RIP). The modem router is shipped preconfigured to use private IP
addresses on the LAN side and to act as a DHCP server. The modem router's default LAN IP
configuration is as follows:
LAN IP address. 192.168.0.1
•
Subnet mask. 255.255.255.0
•
These addresses are part of the private address range designated by the Internet
Engineering Task Force (IETF http://www.ietf.org/) for use in private networks, and should be
suitable in most applications. If your network has a requirement to use a different IP
addressing scheme, you can make those changes in the LAN IP Setup screen.
If you change the LAN IP address of the modem router while
Note:
connected through the browser, you are disconnected. To reconnect,
open a new connection to the new IP address and log in.
Advanced Settings
80