Step-By-Step Configuration - NETGEAR DGND3800B User Manual

N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B
10.506.0/24
Gateway A
(DGND3800)
LAN IP
10.5.6.1
Figure 23. VPNC example, network interface addressing

Step-by-Step Configuration


To configure a VPN tunnel:
Use the VPN Wizard to configure Gateway A (DGND3800B) for a gateway-to-gateway
1.
tunnel (see
Set Up a Gateway-to-Gateway VPN Configuration
certain to use appropriate network addresses for the environment.
The LAN addresses used in this example are as follows:
Unit
DGND3800B
FVL328
a. For the connection name, enter toGW_B.
b. For the remote WAN's IP address, enter 22.23.24.25.
c. Enter the following:
IP Address. 172.23.9.1
•
Subnet Mask. 255.255.255.0
•
d. In the Summary screen, click Done.
Use the VPN Wizard to configure the Gateway B for a gateway-to-gateway tunnel (see
2.
Up a Gateway-to-Gateway VPN Configuration
appropriate network addresses for the environment.
a. For the connection name, enter toGW_A.
b. For the remote WAN's IP address, enter 14.15.16.17.
c. Enter the following:
IP Address. 10.5.6.1
•
Subnet Mask. 255.255.255.0
•
d. In the Summary screen, click Done.
Internet
WAN IP
14.15.16.17
WAN IP
14.15.16.17
22.13.24.25
VPN Configuration
149
Gateway B
WAN IP
22.23.24.25
on page 114), being
LAN IP
10.5.6.1
172.23.9.1
on page 114), being certain to use
172.23.9.0/24
LAN IP
172.23.9.1
LAN Subnet Mask
255.255.255.0
255.255.255.0
Set