Table of Contents
Advertisement
Interface Specifications
LAN:
WAN:
Default Configuration
You can use the reset button located on the front of your device to reset all settings to their factory
defaults. This is called a hard reset. To perform a hard reset, push and hold the reset button for
three seconds. Your device will return to the factory configuration settings shown in the table
below.
Feature
Router Login
User Login URL
User Name (case sensitive)
Login Password (case sensitive)
Internet Connection
WAN MAC Address
WAN MTU Size
Port Speed
Local Network (LAN)
Lan IP
Subnet Mask
RIP Direction
RIP Version
RIP Authentication
DHCP Server
DHCP Starting IP Address
DHCP Ending IP Address
DMZ
Time Zone
40
10BASE-T or 100BASE-Tx, RJ-45
ADSL, Dual RJ-11, pins 2 and 3
T1.413, G.DMT, G.Lite
Default Behavior
http://www.routerlogin.net or http://www.routerlogin.com
admin
password
Use Default address
1500
AutoSense
192.168.0.1
255.255.255.0
None
Disabled
None
Enabled
192.168.0.2
192.168.0.254
Disabled
GMT
Technical Specifications
Advertisement
Table of Contents
Troubleshooting
