NETGEAR DG834Nv2 - RangeMax NEXT ADSL2+ Modem Wireless Router Setup Manual page 8

Table 1. LED Descriptions (continued)
Label LED Activity
Solid Green
Blinking Green
2. LAN
Solid Amber
Ports
Blinking Amber
Off
Solid Green
Blinking Green
3. Wireless
Off
Solid Green
4. ADSL
Blinking Amber
Link
Off
Solid Green
5. Internet
Blinking Green
(WAN)
Red
Off
Solid Green
6. Push 'N'
Blinking Green
Connect
Off
4
Description
The Local port has detected a link with a 100 Mbps device.
Data is being transmitted or received at 100 Mbps.
The Local port has detected a link with a 10 Mbps device.
Data is being transmitted or received at 10 Mbps.
No link is detected on this port.
Indicates that the Wireless port is initialized.
Data is being transmitted or received over the wireless link.
The Wireless Access Point is turned off.
The ADSL port is synchronized with an ISP's network-access device.
Indicates ADSL training—ADSL is synchronizing with the DSLAM.
The unit is off or there is no IP connection.
There is an Internet session. If the session is dropped due to an idle
timeout, and an ADSL connection is still present, the light will remain
green. If the session is dropped for any other reason, the light will turn off.
Data is being transmitted over the ADSL port.
The wireless ADSL2+ modem router attempted to connect to the Internet
but failed.
No Internet connection detected.
Indicates a (WPS) connection to a WPS-capable device.
Attempting to connect to a WPS-capable device.
No WPS connection made to a WPS-capable device.
Getting to Know Your Wireless Router