Default Configuration Settings
You can use the reset button located on the back of your device to reset all configuration settings to
their factory defaults. This is called a hard reset.
•
To perform a hard reset, push and hold the reset button for approximately 5 seconds (until the
TEST LED blinks rapidly). Your device will return to the factory configuration settings shown
in
Table 1
below.
•
Pressing the reset button for a shorter period of time will simply cause your device to reboot.
Table 1.
Home Router Default Configuration Settings
Feature
Smart Wizard
Router Login
Router Login URL
Login Name (case sensitive)
Login Password (case sensitive)
Internet Connection
WAN MAC Address
MTU Size
Local Network
Router Lan IP address (the Gateway IP
address)
IP Subnet Mask
DHCP Server
Time Zone
Time Zone Adjusted for Daylight Saving
Time
Default Configuration
Default Configuration
Default Setting
Enabled
http://www. routerlogin.net; http://
www.routerlogin.com; or http://192.168.1.1
admin
password
Default hardware address (on label)
1500
192.168.1.1
255.255.255.0
Enabled
GMT
Disabled
33