To prepare your router for installation:
Carefully peel off the protective film covering both sides of your router (see
1.
Figure 1
Set up your wireless-N modem router by inserting the tabs of the stand (supplied with your
2.
router) into the slots on the bottom of your router as shown in
protective film covering the LED panel of the router.
Figure 2
Place your router in a suitable area for installation (near an AC power outlet and accessible to
3.
the Ethernet cables for your wired computers).
To ensure proper heat dissipation and for router stability, it is important that you
connect the stand and place your router in an upright position.
2
Figure
Figure
2. Then, remove the
Getting to Know Your Wireless Router
1).