Table of Contents
Advertisement
Note
For the comfort of users,
chime and trouble beep
tones revert to the quieter,
default frequency while the
keypad is in use (during or
within 15 seconds of any
button activity at that specific
touchpad).
49
Code
009
111
118
119
222
333
555
888
999
Code
000
001 - 024
600 - 615
678
679
680
697
698
699
Alarm Type
Fire
Police/Intrusion Continuous tone
Auxiliary
Changing Fixed Display LCD Touchpad Chime and Trouble Beep
Tones
The frequency (pitch) of chime and trouble beep tones from a fixed display touchpad can be
adjusted to a more desirable or distinct tone, and to compensate for hearing impaired persons.
¾
To change status tone pitch:
1. Press and hold the ‚ and 0 buttons together until you hear a steady tone, then release the
buttons.
2. Press and hold 1 to lower the pitch or press and hold 2 to raise the pitch.
3. When the desired pitch is heard, release the button.
If there is no touchpad activity for about 15 seconds, the steady tone stops sounding.
Table 5: Pager System Event Codes
System Event
Zone Restoral
System Disarmed
Trouble Condition Cleared
Alarm Canceled
System Armed to STAY
System Armed to AWAY
Phone Test
System Trouble Condition
System in Alarm
Table 6: Pager Codes
Sensor/Zone or User Number
System event not caused by a zone or user
Sensor/Zone Numbers 1 - 24
Regular User Codes 0 - 15 used
System Master Code used
Installer Code used
Dealer Code used
Quick Arm used
Keyswitch Sensor used
System Armed Itself (during service or power-up)
Table 7: System Alarm Sounds
Alarm Sound
Repeating series of three beeps
Rapid beeps
Testing the System
Hide quick links:
Advertisement
Table of Contents
