Keyboard Configuration For Cascade Linkage (Additional) - Honeywell UltraKey Touch HJC4000 Installation And User Manual

Keyboard Configuration for Cascade Linkage (Additional)

Document 800-06554 Rev C
02/11
4. Press Slider_Down, the menu displays (one of):
Network:
DHCP
5. Select the Network: Manual Setting menu and press Ent to confirm. Press the
Slider_Up/Down or the LCD up/down arrow keys to setup the UltraKey Touch
network parameters (IP Address, Gateway, NetMask and DNS):
a. Press the Slider_Up/Down or the LCD up/down
arrow keys to scroll through the menu options and
select IP Address. Press Ent. Using the numeric
keypad, enter an IP address. Press Ent to save.
IPAddr Changed displays on the LCD menu. Press the Slider_Up/Down or the
LCD up/down arrow keys to select Yes to save or No to cancel. Press Ent.
b. Press the Slider_Up/Down or the LCD up/down
arrow keys to scroll through the menu options and
select Gateway. Press Ent. Using the numeric
keypad, enter a Gateway value, as required. Press
Ent to save.
GW Changed displays on the LCD menu. Press the Slider_Up/Down or the LCD
up/down arrow keys to select Yes to save or No to cancel. Press Ent.
c. Press the Slider_Up/Down or the LCD up/down
arrow keys to scroll through the menu options and
select NetMask. Press Ent. Using the numeric
keypad, enter a NetMask value, as required. Press
Ent to save.
NetMsk Changed displays on the LCD menu. Press the Slider_Up/Down or the
LCD up/down arrow keys to select Yes to save or No to cancel. Press Ent.
d. Press the Slider_Up/Down or the LCD up/down
arrow keys to scroll through the menu options and
select DNS. Press Ent. Using the numeric keypad,
enter a DNS value, as required. Press Ent to save.
DNS Changed displays on the LCD menu. Press the Slider_Up/Down or the
LCD up/down arrow keys to select Yes to save or No to cancel. Press Ent.
6. If other changes are required from this menu (language, slider update, cascade
linkage, hardware test, and about) see
page 65. Otherwise the installation and configuration is complete.
Note No entry is required in the baud rate field for Ethernet connected controllers.
UltraKey Touch Installation and User Guide
Network:
Manual Setting
System Administration and Troubleshooting
Network:
Show Net Infor
Network:
IP Address
Network:
GateWay
Network:
NetMask
Network:
DNS
on
37