Default Configuration - NETGEAR DGN2000 - Wireless Router Setup Manual

Interface Specifications
LAN:
WAN:

Default Configuration

You can use the Wireless On/Off and WPS buttons that are located on the side of your router to
reset all settings to their factory defaults. This is called a hard reset. To perform a hard reset, push
and hold the Wireless On/Off and WPS buttons simultaneously for 6 seconds. Your router will
return to the factory configuration settings that are shown in the table below.
Feature
Router Login
User Login URL
User Name (case sensitive)
Login Password (case sensitive)
Internet Connection
WAN MAC Address
WAN MTU Size
Port Speed
Local Network (LAN)
Lan IP
Subnet Mask
RIP Direction
RIP Version
RIP Authentication
DHCP Server
DHCP Starting IP Address
DHCP Ending IP Address
DMZ
Time Zone
40
10BASE-T or 100BASE-Tx, RJ-45
ADSL, Dual RJ-11, pins 2 and 3
T1.413, G.DMT, G.Lite
Default Behavior
http://www.routerlogin.net or http://www.routerlogin.com
admin
password
Use Default address
1500
AutoSense
192.168.0.1
255.255.255.0
None
Disabled
None
Enabled
192.168.0.2
192.168.0.254
Disabled
GMT
Technical Specifications