Troubleshooting - Breville BTM800 Instruction Booklet

TROUBLEShOOTING

POSSIBLE PROBLEM
Tea Maker will not
switch 'ON'
The Tea Maker will
not work
The LCd light has
gone out
I cannot select a
certain function
The LCd screen
displays 'RESET'
The LCd screen
displays 'ERROR'
32
EASY SOLUTION
• Check that the power plug is securely inserted into
the outlet
• Insert the power plug into an independent outlet
• Insert the power plug into a different outlet
• Reset the circuit breaker if necessary
• For additional safety the Tea Maker is fitted with a
thermal cut out. In the event of severe overheating,
the Tea Maker will automatically shut down to prevent
further damage. Should this continue, call the Breville
Customer Service Centre 1300-139-798.
• Check that the Glass Jug is securely positioned on the
Power Base.
• The Tea Maker goes into standby mode if not used for
3 minutes. When in standby mode, the LCd screen will
cease to illuminate.
• To re-activate the Tea Maker out of standby mode:
- Remove then replace the Glass Jug from the
Power Base.
- Press any button on the Power Base except the
HOT WATeR|Cancel or TeA|Cancel buttons.
The LCd screen will re-illuminate.
• Certain features cannot be selected or changed during
the heating or brewing cycle. The LCd screen may
temporarily change or a sound alert may be heard, but
no changes to the cycle will be made.
• The LCd screen will display a flashing 'ReSeT' when
there is a resettable electronic issue. Remove the plug
from the wall outlet, wait 5 seconds, then plug back in.
• Call Breville Customer Service 1300-139-798 if the
'ReSeT' message continues.
• The LCd screen will display a flashing 'eRROR' when
there is a non-resettable issue with the appliance.
Should this occur, call the Breville Customer Service
Centre 1300-139-798.