A Note On Standby Mode - Breville BTM800 Instruction Booklet

Once current time and start time
5.
are programmed, press either the
flashing HOT WATeR|Cancel or
TeA|Cancel button to select which
feature you would like to start at the
programmed time.
The LCd screen will display the current
6.
time and start time, in addition to the
AUTO START symbol. The AUTO
START button surround will illuminate
and remain illuminated until the START
TIMe is reached, indicating that the
'Auto Start' feature has been activated.
ensure that the Tea Maker is
7.
prepared with:
a) Sufficient water in the Glass Jug and
tea leaves in the Basket for the tea
brewing cycle or,
b) Sufficient water in the Glass Jug for
the water heating cycle.
NOTE:
Insufficient water may discolour
your teamaker base!
Once the selected START TIMe
8.
is reached, the Tea Maker will
automatically commence the tea
brewing or water heating cycle. during
this time, the AUTO START button
surround will no longer illuminate until
the cycle is complete.
Re-selecting the 'Auto Start' feature
using previous START TIME
Press the AUTO START button
1.
once. The HOT WATeR|Cancel and
TeA|Cancel buttons will flash.
Press either the HOT WATeR|Cancel
2.
or TeA|Cancel button to re-select the
the desired function. The 'Auto Start'
feature has now been re-set.
NOTE:
The 'Auto Start' feature can be
canceled anytime by pressing
the AUTO START button. The LCd
screen will no longer display the
AUTO START symbol and the
AUTO START button surround will
cease to illuminate.

A NOTE ON STANdBY MOdE

When the Tea Maker is plugged into a wall
outlet, the LCd screen will illuminate for
3 minutes before entering standby mode.
When in standby mode, the LCd screen
will cease to illuminate.
To re-activate the Tea Maker out of
standby mode, press any button,
except the HOT WATeR|Cancel or
TeA|Cancel button on the Power Base.
The LCd screen will re-illuminate.
Pressing either the HOT WATeR|Cancel or
TeA|Cancel button will start the respective
operation immediately.
25