Use As A Tea Maker For Brewing Tea; Selecting The Tea Type - Breville BTM800 Instruction Booklet

BREwING TEA
USE AS A TEA MAKER FOR
BREwING TEA
Remove the Glass Jug from the Power
1.
Base and remove Jug Lid. When
brewing tea, fill with desired amount of
water. ensure you do not fill past the tea
maximum mark (1200mL TeA MAX).
FILLING PAST ThE 'MAx' LINE
!
MAY RESULT IN SERIOUS BURNS
OR INJURIES AS A RESULT OF
OVERFLOwING hOT OR BOILING
wATER. FILLING BELOw ThE
'MIN' LINE wILL RESULT IN ThE
TEA MAKER SwITChING OFF
BEFORE ThE wATER hAS BOILEd
OR REAChEd ThE SELECTEd
TEMPERATURE.
Place the Basket on a flat, dry surface.
2.
Remove Basket Lid by lifting from
the sides.
Use the provided Tea Scoop to fill the
3.
Basket with tea leaves. As a general
guide, use 1 scoop of tea leaves
per cup / 250ml of water, however
this will depend on the instructions
on tea packaging and your personal
preference (See Page 12, Water to
Tea Scoop Ratio).
Replace the Basket Lid on top of the
4.
Basket. ensure lid is securely snapped
in place by pressing firmly on the centre
of the lid.
Slide the assembled Basket on to the
5.
magnetic post located within the Glass
Jug. The assembled Basket will attach
itself to the top of the magnetic post.
Replace Jug Lid.

Selecting the Tea Type

The tea type determines brew temperature.
The Tea Maker has 5 preset tea types
recommended for optimal brewing of
Green, Black, White, Herbal or Oolong Tea.
It also features a customisable tea type
temperature setting for other tea varieties
or to suit your personal taste (see Page 23,
Customising Brew Temperature).
To select a preset tea type:
6.
a. Press the TeA TYPe button and
toggle through until the desired tea –
'Green', 'Black', 'White', 'Herbal' or
'Oolong' illuminates.
b. The LCd screen will display
the preset brew temperature
recommended for optimal brewing
of the selected tea type. This is
displayed as the left figure on the
LCd screen.
17