Auto Start Feature - Breville BTM800 Instruction Booklet

AUTO START
i) Press the right
button to increase the time up to the
maximum 10 minutes.
ii) Continue to press the right
ARROW UP button. The LCd
screen will display 'MANUAL LIFT'
and '- - : - -' on the right side of
the LCd.
iii) Once the Tea Maker is activated
and the correct water temperature
is reached, the Basket will
automatically lower.
iv) In the manual lift mode, the LCd
screen will automatically commence
the 'Brew Time' feature. This feature
counts up to a maximum of 60
minutes, allowing you to monitor
how long the Basket has been
submerged.
v) Once the desired brew time has
elapsed, press and hold the BASkeT
button for 2 seconds. The Basket
will rise.
vi) Once the brewing is complete, the
LCd screen will automatically display
the 'Time Since Brew' function. This
function counts up to a maximum of
60 minutes, allowing you to monitor
the freshness of your brew. It does
not activate the heating elements.
24
ARROW UP
NOTE:
Once a customised time has been
selected and one tea making or
water heating cycle has been
activated, the customised time will
remain in the memory of the Tea
Maker until you change it. To return
to default settings, see Page 33.

AUTO START FEATURE

This feature allows you to program the
specific time when the Tea Maker will
automatically turn on and start either a tea
brewing cycle or water heating cycle.
Setting the 'Auto Start' Feature
Press and hold the AUTO START
1.
button for 2 seconds. The button
surround will illuminate and the tea alert
will sound.
The LCd screen will display the
2.
START clock symbol and a blinking
CURReNT TIMe and START TIMe.
To set the CURReNT TIMe, press the
3.
left ARROW UP button to increase
the time, or the left
button to decrease the time in 1 minute
increments. ensure the correct 'AM' or
'PM' is displayed.
NOTE:
Pressing and holding the
ARROw UP button or
ARROw dOwN button will
increase the scrolling speed.
To set the START TIMe, press the right
4.
ARROW UP button to increase the
time, or the right
button to decrease the time in 1 minute
increments. ensure the correct 'AM' or
'PM' is displayed.
AUTO
ARROW dOWN
ARROW dOWN