Avance ® Skillet - Breville BEF200 - REV A10 Instruction Booklet

CARE, CLEANING & STORAGE FOR yOUR BREvILLE AvANCE
CARE
• Do not leave plastic cooking utensils
in contact with the hot Avance
surface while cooking.
• Do not use metal utensils on the
non-stick coating of the Avance
Only use wooden or good quality plastic
utensils to stir or serve food.
• Before cleaning, switch the Avance
Skillet to 'MIN' and unplug power cord
from the power outlet. Remove the
temperature probe when cooled from
the socket in the appliance.
CLEANING
Temperature Control Probe
• If cleaning is necessary, wipe the
Temperature Control Probe over with
a slightly damp cloth. Ensure it is
completely dry before use.
NOTE
Never immerse the temperature
control probe or power cord in water
or any other liquid.
TIP
For convenient storage of the
temperature control probe, line the
Avance Skillet with 2 sheets of
®
kitchen paper and place the probe on
the kitchen paper. This will ensure the
probe and plug don't scratch the non-
stick surface.
Non-stick cooking surface
Your Avance Skillet features high quality
®
two coat non-stick coating, ideal for low fat
cooking. Regardless of this fact, Breville
recommends that care is taken with the
non-stick coating particularly when using
metal utensils. Do not use sharp objects
or cut food inside the Avance
Breville will not be liable for damage to
the non-stick coating where metal utensils
have been used. Cooking on a non-stick
Skillet
®
surface minimises the need for oil, food
does not stick and cleaning is easier. Any
discolouration that may occur will only
Skillet.
®
detract from the appearance of the
Avance
cooking performance. When cleaning the
non-stick coating, do not use metal (or
®
other abrasive) scourers. Wash in hot, soapy
water. Remove stubborn spots with a plastic
washing pad or nylon washing brush. Rinse
and dry thoroughly.
Removing discolouration of the
non-stick surface
•
•
•
dishwasher safe
Your Avance
safe for easy cleaning. The recessed heating
element is completely sealed so it is safe to
immerse in water.
STORAGE
Store the temperature probe carefully. Do not
knock or drop it as this can damage the probe.
If damage is suspected, return the temperature
control probe to your nearest Breville Service
Skillet.
®
Centre for inspection.
SKILLET
®
Skillet and will not affect the
®
Combine 2 tablespoons bicarbonate of
soda, ¼ cup household bleach, 1 cup water.
Pour into the Avance
with the vent closed, and simmer for 5-10
minutes.
Clean in a well-ventilated area and
avoid breathing in the vapours. Wash as
directed before re-use. In some instances
this may not remove all the staining.
Skillet vessel is dishwasher
®
NOTE
Before inserting the temperature
control probe into the Avance
Skillet socket, ensure the interior
of the socket is fully dry. To do this,
shake out excess water then wipe the
interior of the socket with a dry cloth.
Skillet, place lid on
®
®
11