Breville BEF200 - REV A10 Instruction Booklet page 44

KNOW yOUR BREvILLE AvANCE
BEFORE FIRST USE
It is recommended to remove any
promotional labels and wash your Avance
Skillet in hot soapy water. Rinse and dry
thoroughly. Do not immerse the power cord
and/or temperature control probe in water
or any other liquid.
OPERATION OF yOUR SKILLET
1. Insert the temperature control probe
into the probe socket on the appliance.
Plug power cord into a 230/240V power
outlet and switch 'ON'. Always insert the
probe into the appliance first, then plug
power cord into main power outlet.
NOTE
Before inserting the temperature
control probe into the Avance
Skillet socket, ensure the interior
of the socket is fully dry. To do this,
shake out excess water then wipe the
interior of the socket with a dry cloth.
2. Turn the dial on the heat probe
clockwise to the desired setting.
The heating 'ON' light will illuminate.
3. The red temperature control light
will be on until the Avance
reaches the desired temperature. Once
the temperature has been reached,
the red light will cycle 'ON' and 'OFF'
during cooking to retain the desired
temperature.
4. When cooking is completed, turn the
dial anti-clock-wise until it is aligned
with the 'MIN'. Switch off at the power
outlet and unplug power cord.
8
SKILLET
®
5.
6.
®
NOTE
This Avance
with the temperature control probe
provided. Do not use any other probe
or connector.
®
Skillet
®
Leave the temperature control probe
connected to the appliance until cool.
Remove the Temperature Control Probe
and follow the cleaning instructions to
clean your Avance
Skillet (page 10).
®
Skillet must be used
®