Recording Operations - Casio BE-300 User Manual

Important!
• You need to purchase an optionally available Digital Camera Card (JK-710DC) to record digital
images.
• Do not install the Mobile Camera Application that comes with the digital camera card
onto your CASSIOPEIA.

Recording Operations

Getting Ready
Check the following points before trying to record.
• Make sure the Digital Camera Card is correctly installed into the card slot of your
CASSIOPEIA. See the separate documentation that comes with the Digital Camera Card for
details about installation.
• See the separate documentation that comes with the Digital Camera Card for information about
adjusting the focus range, rotating the lens, and other Digital Camera Card operations.
• Check the remaining power levels of the battery pack of your CASSIOPEIA. If it is low,
recharge it.
To record snapshots
1. Start up Photo Viewer.
2. If the thumbnail index screen appears first, tap
Status bar
Viewfinder
Control panel
• Check to make sure that the message Ready to record is in the status bar. See "Interpreting
Status Bar Information" on page 107 for details.
3. Enter the Snapshot Mode by tapping
• Steps 4 through 7 cover other pre-shutter release settings that are not essential and may be
skipped if you want.
4. Specify the image quality.
• On the control panel, tap the image quality button to cycle through the image quality settings
shown below.
.................. Fine (highest quality, largest file size)
.................. Normal (medium quality, medium file size)
.................. Economy (lowest quality, smallest file size)
to display the camera screen.
.
105
Folder name
Icon bar