D-Link SECURICAM Network DCS-2120 User Manual page 58

Section  - Configuration
For detailed information about each setting, please refer to
Configuration > Advanced > Mail & FTP in the section titled
"Using the DCS-2120 With an Internet Browser" (page 29).
Click the apply button when finished.
Next, click the Applications button under the Tools tab to set
the application settings for the DCS-2120.
In this window, follow the steps below to set the application
settings for snapshots to be recorded to an FTP site:
1 Check the Enable snapshot box.
2 Select Weekly schedule and setup Time.
3 Select Motion Detection and check the motion window
name (in this case: test).
4 Set the delay to "take snapshots after event" to capture
the direction of the moving object.
5. Click Send snapshots by FTP and check "FTP put
snapshots with date and time suffix".
6. Click the "Apply" button to save the settings.
Click the apply button when finished. You are now able to record snapshots to your FTP server when motion detection
is triggered.
D-Link DCS-10 User Manual