Section - Configuration
Schedule Video Recording with Motion Detection
To schedule video recording with motion detection, you must first enable motion detection on the Internet Camera. Click
the Motion Detection button under the Advanced tab from the Configuration screen to access settings that affect how
the DCS-2120 Internet Camera can serve as a security
device by recording only when motion is detected.
Note: These settings can be configured in your Web browser
and while logged into the IP surveillance Program.
In this window, follow the steps below to ensure that motion
detection is correctly enabled:
1 Check "Enable motion detection."
2 Click on "New" to have a new window to monitor
video.
3 Enter in a window name.
4 Adjust the "Sensitivity" and "Percentage" levels according to the local environment. The highest sensitivity and
lowest percentage provides the most sensitive setting.
5 After adding the motion window, click on save to enable the activity display. You can add up to 3 motion windows
to trigger recording.
D-Link DCS-10 User Manual
111