Table of Contents
Advertisement
CO Alarm
4.7 CO Alarm
CO Alarm Event
•
Activation of a device (detector or module) with a CO Alarm type code. (Refer to Table G.2, "Type Codes for Monitor Modules," on
page 98)
•
Produces a pulsed audible tone
•
appears in the Header Bar
CO ALARM
•
illuminates in the Alert Bar as a blue color indicator and provides CO event counts
CO ALARM
•
Illuminates the yellow Off Normal LED
•
Displays
CO ALARM
•
Displays information on how to react to the event in the Instructional Text Area
NOTE: If an unacknowledged, higher priority event exists, the control panel will retain the indications of the higher priority event, such as an
audible tone, etc. The flashing the CO Pre-Alarm Graphic and sending the CO Pre-Alarm message to the history buffer and printer, and
annunciators will still occur at the time of the event.
Responding to a CO Alarm Event:
•
The Informational Text Area on the screen will indicate step by step what needs to be done to acknowledge and silence the event.
•
Tap on the
ACKNOWLEDGE
mark will appear next to the acknowledged event. Once all the events have been acknowledged the blue highlight indicator will move
from the
ACKNOWLEDGE
•
Tap on the
SILENCE
silenced all silenceable outputs will turn off.
•
Investigate and correct the condition that activated the CO Alarm point.
•
Once all events on the N16 have been silenced the blue highlight indicator will move from the
touchpoint.
•
Tap the
RESET
N16 Instruction Manual P/N LS10239-000NF-E:A 04/20/2021
and specific device information in the Events List
CO ALARM
Step 1 Acknowledge each event. This is secondary text to explain what acknowledging an event means and who should do it.
FIRE ALARM
UNACKNOWLEDGED CARBON MONOXIDE ALARMS (1)
1
CO ALARM
CO ALARM
CO MONITOR
SUPERVISORY
TROUBLE
DISABLE
OTHER
SIGNALS
SILENCED
touchpoint located in the Header Bar. The
touchpoint to the
SILENCE
touchpoint located in the Header Bar. The
touchpoint located in the Header Bar to return the N16 to normal operations.
Ack
First Floor, Guest Room
Zone Z115 (Z115)
Figure 5 CO Alarm Screen
ACKNOWLEDGE
touchpoint.
icon in the Alert Bar will illuminate yellow once the N16 is
SILENCE
Thu 2/22/20
1:38:06PM
Silence
Reset
Thu 02/22/18
1:52:57 PM
NO25L01M011
touchpoint will be highlighted in blue. A check
touchpoint to the
SILENCE
Operations
RESET
63
Advertisement
Table of Contents
