Table of Contents
Advertisement
Performing a local HotSync
If a message is displayed stating that the selected COM port is
not available
Follow the procedures below. If the same message appears again, uninstall
the Palm Desktop for CLIE software and then re-install it.
1
Click the HotSync
right corner of the taskbar).
A shortcut menu is displayed.
2
Make sure that Local is not selected.
If it is selected, click Local to clear it.
Notes
• Even if the HotSync operation is performed via a USB connector and the cradle,
"Serial" is indicated.
• Do not remove your CLIE handheld from the cradle during a HotSync operation.
• Do not push the HotSync button during a HotSync operation. It might cause errors
and force termination of the operation.
• Do not enter power saving mode during a HotSync operation. If your computer
enters power saving mode during a HotSync operation, the HotSync Manager will
be forced to terminate.
To control multiple CLIE handhelds from a computer
You have to create a user profile for each CLIE handheld. See "Creating a user profile
to control multiple CLIE handhelds" on page 122 for creating a use profile.
To change the user name
1
In the Palm™ Desktop for CLIE window, click Users from the
Tools menu.
The Users dialog box is displayed.
2
Click the user name you want to change in the list box and
then click Rename.
The Rename User dialog box is displayed.
3
Enter a new user name and then click OK.
Your CLIE handheld user name is changed at the next HotSync operation.
Chapter3
Exchanging and updating data using a HotSync
®
operation with the cradle
icon in the Windows task tray (bottom-
®
operation
115
Advertisement
Table of Contents
